Menu
UKR
ESP
RUS
RUS
Youtube
Facebook
News subscription
Back
Extruder GP-350 for Pini-kay briquette production

Extruder GP-350 for Pini-kay briquette production

Extruder GP-350 is designed for production of fuel briquettes pini-kay from plant waste without the use of binders.

Pini-kay briquettesPini-kay briquettes

Equipment is designed for production of briquettes (without binders), which have wide application and are used as solid fuel in boilers, furnaces, fireplaces, grills, barbecues, etc.  Raw material for this extruder is a plant biomass such as husks of sunflower, buckwheat, rice, walnut shells, olive stones, wood chips and sawdust of different wood types.

The possible shapes of the briquette

The possible shapes of briquette

Briquettes Pini-Kay have wide application:

  • As a solid fuel in boilers, kilns, furnaces, etc.
  • As raw materials for producing charcoal of a new generation by the pyrolysis of briquette in charcoal kilns.

This extruder application allows:

  • To produce fuel with calorific value 4200-4900 kcal/kg (on the same level with mineral coal)
  • Utilize industrial waste of wood processing and production of edible and technical oils
  • Create ecological energy carrier from the renewable sources.

Principle of extruder operation

Principle of operation

Raw material dried up to 8% is supplied from the loading hopper 1 by the screw feeder 2 into the feed spout 5 of the extruder operating device. Raw material is supplied from feed spout by the conic screw into the heating chamber 6, where the briquette is formed due to the heating of the lignin. The briquette is pushed from the heating chamber into the divider 7.

Length of briquette can be adjusted by dividing or trimming device.

After the briquetting crosscutter GP-350 can be applied, in this case briquettes are cut into good quality pieces of adjusted length.

Screw extruder for fuel Pini-kay briquettes production

Specification

Parameter

 

Value

Productivity, up to kg/hour

 

500

Moisture of raw material at the inlet of extruder, %

 

4-8

Fraction of source raw material, mm

 

2-10

Power consumption (including heater), kW/hour, not more

 

46,4

Heater power consumption, kW/hour, not more

 

7,2

Electricity consumption per 1 hour of operation, kW, not more

 

38

Specific electricity consumption, kW*hour/kg, not more

 

0,1

Length (including briquettes divider), mm

 

3800

Width, mm

 

1200

Height, mm

 

2250

Weight, kg

 

1600

Warranty period, months

 

12

 

This equipment is perfect for production of new generation charcoal.

 Charcoal briquette from pini kay   Fuel briquettes combustion

In order to produce charcoal from pini-kay briquette charcoal burning kiln is used.  

Useful information:

  • 400 kg of charcoal is produced from 1 ton of briquettes
  • 1 ton of briquette charcoal is 4 times more expensive than usual pini-kay briquette
  • Pini-kay briquette charcoal burns 2 times longer than usual charcoal
  • Consumption of pini-kay briquette charcoal is 2 times lower than usual charcoal
  • Charcoal  briquettes are in demand all year round all over the world

Charcoal kiln CK-4 EURO

In case of ordering equipment for charcoal production from pini-kay briquette, 

special prices are valid.

email
×

You`ve entered incorrect E-mail address

×

Entered E-mail is already in newsletter

×

You succesfully subscribed to our news

    ‎+38093 958 74 14

    ‎+35989 558 19 04

GreenPower 

info@piroliz.org