Menu
UKR
ESP
RUS
RUS
Youtube
Facebook
News subscription
Back
CK “EURO” went out of production

Le Roi est mort, vive le Roi!

There is an end of era of CK “EURO” manufactured since 2009 till 2013.

We would like to draw a chronology of the main events connected with development and manufacture of charcoal-burning kiln CK “EURO”.

2008, experimental CK “EURO”

 2008, experimental CK “EURO”

At the beginning of 2007 an idea was suggested to produce environmentally-friendly charcoal kiln which would be able to be operated by small and medium-sized enterprises without application of lifting mechanisms. Besides it was suggested to implement and idea of chamber modes switch in order to exclude relocation of raw material! In a year after long contemplation we started manufacture of experimental CK “EURO”. Till May of 2008 it had been produced and we began the trial.

                

2009, the 1st charcoal-burning kiln CK”EURO”

In 2009 the first industrial design of CK “EURO” was produced. It was sent and started up in Kaluga region of RF. In whole 20 units of charcoal-burning kilns CK “EURO” were manufactured in 2009. Despite numerous shortcomings some kilns are still working. For example there is CK “EURO” in Chuguyev of Kharkov region.

 

 

 

                           

          2009, the 1st CK”EURO”

 

2009, the 10th charcoal-burning kiln CK “EURO”

2009 turned to be a difficult year for us and our customers, as we faced those problems which we couldn’t foresee at the experimental site, and there were a lot of them. 

 

 

 

 

        

          2009, the 10th CK “EURO”, Kyiv region

 

November 2010, charcoal-burning kiln CK EURO

Technical progress along with engineering idea doesn’t stay at place but moves forward with 7 miles steps. Thus our CK “EURO” has been changing each year…

In 2010 CK “EURO” acquired new look. Besides inner content of the chambers and furnace were changed.

Due to our efforts in 2010 CK “EURO” kilns could work stable but there still were a lot of problems…

 

      

       November 2010, CK EURO, Donetsk region

 

November 2010, charcoal-burning kiln CK EURO-2

Technical progress along with engineering idea doesn’t stay at place but moves forward with 7 miles steps. Thus our CK “EURO” has been changing each year…

In 2010 CK “EURO” acquired new look. Besides inner content of the chambers and furnace were changed.

Due to our efforts in 2010 CK “EURO” kilns could work stable but there still were a lot of problems…

 

      

       November 2010, CK EURO, Donetsk region

 

2012, charcoal-burning kiln CK EURO

At the beginning of 2012 CK EURO was shipped and started as the first kiln Egypt.

106 kilns had been produced till this moment, at the same time our representatives attended almost all startups, they carried out installation supervision, startup and adjustment works including staff training. We tried to foresee all possible situations at the manufacture…

      

            June, 2012, Cairo, Egypt

 

2013, charcoal-burning kiln CK EURODuring the period of 2012 so much upgrades had been applied that we issued detailed description of CK EURO 2012. Our efforts were not vain and we received an opportunity to enter the new level.

Total number of the produced kilns in 2013 reached 194 units. No we had only to struggle against the human factor. In a five year period about 200 units of CK “EURO” kilns were dispatched to near and far-abroad countries. There are good and bad opinions regarding this kiln.

            July, 2013, Vilnius, Lithuania

 

Nevertheless CK “EURO” took the deserving place in charcoal burning in different countries of the globe.

Autumn 2013, “Greenpower” Company was headed by new director, who took a decision to stop the manufacture of CK “EURO”.

Core institutions such as National Technical University “Kharkov Polytechnic Institute” and Ukrainian Institute of refractory materials named after A.S. Berezhnoy took part in the development of new model. Absolutely new model CK-2 “EURO” replaced the old one. Don’t be daunted by the change of one figure in the name. Titanic efforts of “GreenPower” team are  hidden by this change:  development engineers, heating engineers, managers who keep in touch and take into account all wishes of the customers.

2013, charcoal-burning kiln CK EURO-S

                    CK-2 “EURO-S”, November, 2013, Varna, Bulgaria

«The road will be handled by the walker. I’m sure that the way passed by charcoal-burning kiln CK “EURO” was difficult but we wouldn’t get a result without it…”

Gleb Kopyltsov

Director of “Greenpower” LLC

  

 

email
×

You`ve entered incorrect E-mail address

×

Entered E-mail is already in newsletter

×

You succesfully subscribed to our news

mob: +359 249 133 07

mob: +359 895 581 904

e-mail: info@piroliz.org

You can call us from 8.00 till 22.00 (GMT +2)